Compare and Contrast between Vertigo and Forrest Gump Essay

Compare and Contrast between Vertigo and Forrest Gump - Essay Example Scottie tails her when she visits the art gallery to view Carlotta’s portrait, later she purchases florets similar to those in the Carlotta's portrait, before visiting a hotel which was Carlotta’s former room and her graveyard. Afterwards, he saves her from imminent death and he begins efforts to free her from her obsession. However, he loses her. Later, when he meets a girl on the streets with an eerie semblance to Madeleine, his personal obsession starts, and he attempts to remake her to Madeleine. Many movements are found in this movie. One movement widely used in vertigo is zoom and dolly. A dolly shot involves capturing the images with cameras attached to a mobile platform (dolly) (Boogs 45). The platform could be fitted with wheels or it could be a track to enable the actions to be recorded several times if need be. It is widely applied in the movie to follow different scenes especially where two individuals are walking as they talk. This shot may engross followin g a particular exploit such as two people walking while engaged in a conversation. In the zoom movement, the focal length lens is varied resulting in the scene being close or far. However, this makes the films appear unnatural. The movie vertigo effectively combines these two techniques to Alfred Hitchcock made effectual utilization of an amalgamation of a zoom and a "dolly" in the movie Vertigo to display Scottie’s acrophobia. For instance, when Scottie ascents to the tall bell turret and gazes down, the quick pulling back of the camera and the simultaneous zooming of the focal lens from wide angle to telephoto illustrates this phenomenon (Locke). The outcome of this movement is that objects that were close continue the unchanged size while the near objects seemed to stay the same size but the foot of the turret in the distance appeared rushed up to the viewers, thereby effectively creating a perturbing sense of dizziness and lightheadedness. Vertigo is a quite constrained m ovie that greatly applies the 180-degree rule. It is largely acted in the third person and employs continuity editing although there are few first person acts. It appears that the third person acts were mostly abridged from many short-range and long-range camera shots and movements resulting in a fine flow. The first person acts have different camera movements and abridging techniques including numerous fast camera movements, long and crane shots, and cutout, montage editing. Some specific camera movements that are clearly demonstrated are the fluid, zoom-in recording and the 360-degree pan. The former is brought out at the restaurant when Scottie begins to follow Madeleine while the latter is shown when Scottie meets Judy and remakes her to Madeleine. In swish or whip pan, the camera movement is so quick that the pictures are blurred. This is used to produce a vertiginous effect of weightlessness (Boggs, 54). Forest Gump is a story of a simpleton’s epic journey all the way t hrough existence in the later half of the 20th century. While on the way, he stumbles upon real-life historical figures and participates in actual historical events. Forrest is the embodiment of traditional values such as worshipping God, honoring the parents and doing he is told, and never questions authority. He succeeds in life by embracing the values of mainstream society. The movie Forrest Gump is very discontinuous and

People Behaviour Essay Example for Free

People Behaviour Essay Methodology is concern with both the detail research methods through with data is collected, and the more general philosophies upon which the collection and analysis of data are based. In methodology there are two types of research methods in which researchers can depend on when researching. These are â€Å"Quantitative† and â€Å"Qualitative† research. Quantitative research deals with a term which August Comte came up with, â€Å"Positivism.† This quantitative research deals with more scientific research than based on theory, it focuses on scientific methods of study. Despite the considerable influence of the ‘scientific’ approaches to sociological methodology, an alternative series of interpretive or qualitative approaches has long existed within sociology. Qualitative research often collects subjective data such as information about people’s emotions, feelings and values and also isn’t structure like quantitative research. Between both the ‘Quantitative and Qualitative research’, quantitative uses questionnaire to gather data. A questionnaire is a number of preset questions that can contain open-ended, fixed choice or combination of both types of questions. In this essay it would be shown that questionnaires cannot be used to capture the truth about people’s behaviour, but to an extent. In questionnaire research the same questions are usually given to respondents in the same order so that the same information can be collected from every member of the sample. There are many methods on how to distribute questionnaires. The first method would be the postal questionnaire, as the name suggests it is mailed to the respondents with a stamped address envelope for return to the researcher. Postal questionnaires are rather inexpensive, time consuming and has little less than fifty percent (50%) of  the questionnaires posted back. This would seriously bias the researcher research, since there may be systematic differences between those who returned questionnaires than those who did not. For example, the main response to a postal questionnaire on marital relationships might come from those experiencing marital problems and wish to air their grievance. If non-respondents were happily married, the researcher would be unjustified in making generalizations about married life on the basis of the return questionnaires. Therefore the researcher would not be able to analyse the questions clearly and would not be able to analyse properly the married couples who are happy, sad, frustrated or even devoice, because of the lack of questionnaires missing from married couples. Apart from the first method, the second method has a far higher return rate than the postal. This is because it is to administer the questionnaire to a group such as a class of students or workers at a union meeting. This method is less expensive and maintains the advantage of the presence of an interviewer. However, the interviewer must ensure that the respondents do not discuss anything while doing the questionnaire, due to the researcher would like the respondent own view and not from the help of others. This would therefore give the researcher an image towards how the respondent expresses themselves towards the questions within the questionnaire. The first two (2) methods that were stated above both used questionnaires mainly the first through postal and the second has an interviewer present at the time the questionnaires were given out. This method in the other hand is done through the telephone. This is mostly used in conducting of market research for companies, but it is not usually regarded satisfactory by sociologist. According to (Aldridge and Levine, 2001), it is hard to establish rapport in such interviews, disadvantage groups tend to be under-represented in samples, it is difficult to ask sensitive questions, respondents cannot be expected to remember a wide range of possible answers to fixed-choice questions, and visual aids cannot be used. This may make the respondent very uncomfortable and due to that they would not be willing to cooperate and answer the telephone questionnaire.  Therefore this may make it very hard on the researcher due to he or she would not be able to gain a proper response from the responden t. The fourth possibility is to administer questionnaires by e-mail. According to (Geoff Payne and Judy Payne, 2004), this may be a useful way of conducting dispersed groups of people, or those who might not wish to be questioned face-to-face. For example, it has been used in a study of people who committed self-harm. Although this method has its advantages, it also has its disadvantages. A problem of this is that genuine anonymity is difficult to assure since it is possible to track the source of an emailed response. Another big problem may be that the sample is restricted to those with access to computers and may therefore be unrepresentative, although the significance of this will diminish as the number of people without email and internet fails. This therefore would be a problem to the researcher because he or she may not be able to interpret the behaviour of the respondent towards the questionnaire and also the respondent may not take on the research seriously. These things hinder the researcher from collecting data towards his or her research. There are many reasons towards why questionnaires are inappropriate to capture the behaviour of people. But there are one or two reasons that could help the research in that, but only up to an extent. The second method that was stated can be of use in this by the interviewer watching every one’s reaction towards the questionnaire. This can determine the respondent answer by the feedback he or she gave during reading the questions. In conclusion, questionnaires can be used to capture people’s behaviour but to an extent. Yet it have been shown in this essay that you cannot simply capture someone behaviour with the use of questionnaires. It is due because the respondent can lie during the questionnaire or even the researcher would not get back a proper feedback to determine the respondent answer. In the end it has been shown that questionnaires cannot capture peoples’ behaviour.

Online Education Versus Traditional Education Essay -- Education and t

With high speed internet available to potential students of all economic levels, schools are opting to implement online classes into their traditional teaching curriculum. As a result, our society is divided in two different ways of thinking on the education. Some believe the modern method is better than the traditional method of teaching. Personally, I believe both methods should balance one another instead of attempting to substitute one another; this way their purpose of educating will be far more successful. Online education, also called long distant learning, can be defined as a new method of learning through a computer network. This modern way of teaching gives students an opportunity to take classes online. Bill Gates recently predicted that in five years most colleges will be providing online education. â€Å"The self-motivated learner will be on the Web,† Mr. Gates said, speaking at the Techonomy conference in Lake Tahoe. â€Å"College needs to be less place-based.†(Steve) Online courses allow students to access course content, including reading lists and library materials, at any time. This flexibility of online courses is primarily important for students who have young children, who are caring for ailing or elderly family members, who have full-time jobs, or who live too far from campus. Flexible hours are also beneficial because it allow students to work at their own speed; taking courses either part time or on an accelerated schedule. According to the article in t he New York Times, titled â€Å"Study Finds That Online Education Beats Classroom,† the SRI International for the Department of Education, conducted a research on online versus traditional classroom teaching from 1996 to 2008. Most of the studies were conducted in co... ...ies to pull up all of those related bits of data from their multiple storage areas in response to a single cue. This cross-referencing of data means we have learned, rather than just memorized.† However, it is important to accentuate that learning highly depends on the students’ motivation to learn. So it still comes down to the effort that the students put into their education that ultimately decides how beneficial the overall experience was to their future career. Works Cited Willis, J. (2008). Brain-based teaching strategies for improving students' memory, learning, and test-taking success (Review of Research). Childhood Education, 83(5), 31-316. Lohr, Steve. "Study Finds That Online Education Beats the Classroom"." New York Times (2014). Web. 16 Mar 2015. Lohr, Steve. "Second Thoughts on Online Education." New York Times (2013). Web. 06 Mar 2015.

Interest Groups in American Government Essay

Interest groups play an important role in American Government. The large numbers of interest groups present in government represent the reciprocal power and influence that government and business have with one another. This paper will offer reasons why there are so many different interest groups. Interest or lobbying groups provide a means by which â€Å". . . to channel citizens’ concerns to policy makers and administrators (Thomson Nelson). † Interest groups may represent small or large companies, industries, or individual citizens. Due to increased government regulations that affect citizens’ and businesses, interest groups work to make sure the voice of those affected by new laws are heard prior to official legislation or policy being rendered. Interests groups are also large in numbers due to the number of policies that the government is seeking to render. Each policy or bureaucratic legislation the government renders influences a certain sector of society, leading to interest groups trying to influence government policy makers to their favor. Lastly, interest groups are large in numbers due to increased dollars allotted toward funding these lobbying groups. Interest groups have become intricate players for many businesses and are allowed full funding in order to fully advocate for specific interests. In all, interest groups are large influencers in American Government. There are many reasons such as number of policies, increased funding, and increased government regulations that have increased the numbers of interests groups in America today.

Article with logical fallacies Essay

Christians believe God created the whole world because he had the powers, this make them argue out the theory of evolution which states that each and every creature that exist has undergone the process of evolution. Due to the believe in the theory of creation, religion has given trust to their creator who is god, from the ancestral time to modern time. Many societies have followed this because their ancestors had practiced this for a very long time. Christians believe in faith and they argue that their faith is difficult to destroy since they believe in the word of god which was prophesized and written in the bible by men who were inspired by god and this believes have forced non- believers in the society into Christianity. The study of the bible has also strengthen the Christian believe since it has given them reliable evidence that their powerful god exist and one day he shall come into existence and he will save them from the temptation they encounter each and every day . Figure out what kind of logical fallacy is used and how it is used. Logical fallacies are the detects that weakens our arguments or reasoning, It can also be defined as error in reasoning. By having the strength to look at different types of fallacies we are able to evaluate the arguments, readings etc Fallacies have also helped us to improve our critical way of looking at things. The following logical fallacies have been identified in the above article; Fallacies that appeals to galley or Argumentum ad populum this is a fallacy that make people accept something because it is done or accepted by many people, an example in the above article is where people in the society decide to follow Christianity because they found other people had already accepted to follow it. Argumentum ad atiquitatem or fallacy of accepting something since it has been there for along time, example is the above article is where people in the society have accepted to be converted to Christianity since they believe it has been their for along time, therefore it is good to be followed. Argumentum ad baculum or Fallacy that appeal to force in order to prevail in debate, this particular type of fallacy is seen widely in the religion whereby a powerful religion forces non- believers to accept believe in the religion . In the above article non believers are forced to believe that god exists and they should believe in him. Lastly there is the Fallacy where conclusion is drawn from unconnected premises. For example in the above article bible has been believed to have been written by god`s people who were inspired by god, So when people read the bible and learn that it was prophesized by god, they are unable to evaluate it into creative thinking. Reference www. philosophychatforum. com

Todays Male essays

Todays Male essays For the most part, societies (a group of people which have common traditions, interests and institutions) have a large impact on the development of gender. Children grow up to learn from their parents, their neighbor, the baker down the road and it is this understanding of the world which constructs their lives. There is "socialization in general (the learning that neophytes do in order to become functioning members of society), and [there is] gender socialization in particular (the processes through which people learn to be feminine and masculine)" (Mackie, 1987:74). This research paper will deal with men in three fundamental areas of their lives: work, intimate relationships and family. To do this, the paper will only deal with men who have gone through "socialization in general" and who are in the changing process of "gender socialization". An infant or child has a crucial need for "experience with other human beings for its survival as a physical being and its development as a social being" (Mackie, 1987:77). In most societies, for the large part, males have grown up learning or expected to be a dominant figure, one with the power and independence (Doyle, 1989:108). In today's "modern" society, males are not only affected by family, friends or neighbors; they are now heavily influenced by other mediums, such as, TV, music, movies, sports, books (fairy tales), and magazines. These are but a few influences which help shape the modern male. Work occupies on average 40 hours a week, it therefore plays a considerably large role in peoples' lives. The Feminist movement showed, along with other issues, that it was the environment and structure of the workplace, which affected society a great deal. The Feminist movement highlighted the harsh reality of gender inequality in our society. Consequently, there seems to be an overwhelming consensus that males dominate, and have always dominated in the workplace. The reason for this unbal...

List of Elements in the Lathanide Group

List of Elements in the Lathanide Group The lanthanides or lanthanoid series is a group of transition metals located on the periodic table in the first row (period) below the main body of the table. The lanthanides are commonly referred to as the rare earths, although many people group scandium and yttrium together with the rare earth elements. Its less confusing to call the lanthanides a subset of the rare earth metals. The Lanthanides Heres a list of the 15 elements that are lanthanides, which run from atomic number 57 (lanthanum or Ln) and 71 (lutetium or Lu): Lanthanum: atomic number 57 with symbol Ln Cerium: atomic number 58 with symbol Ce Praseodymium: atomic number 59Â  with symbol Pr Neodymium: atomic number 60 with symbol Nd Promethium: atomic number 61 with symbol Pm Samarium: atomic number 62 with symbol Sm Europium: atomic number 63 with symbol Eu Gadolinium: atomic number 64 with symbol Gd Terbium: atomic number 65 with symbol Tb Dysprosium: atomic number 66 with symbol Dy Holmium: atomic number 67 with symbol Ho Erbium: atomic number 68Â  with symbol Er Thulium: atomic number 69 with symbol Tm Ytterbium: atomic number 70 with symbol Yb Lutetium: atomic number 71 with symbol Lu Note sometimes that lanthanides are considered to be the elements following lanthanum on the periodic table, making it a group of 14 elements. Some references also exclude lutetium from the group because it has a single valence electron in the 5d shell. Properties of the Lanthanides Because the lanthanides are all transition metals, these elements share common characteristics associated with metals. In pure form, they are bright, metallic, and silvery in appearance. Because the elements can have a variety of oxidation states, they tend to form brightly colored complexes. The most common oxidation state for most of these elements is 3, although 2 and 4 are also generally stable. The metals are reactive, readily forming ionic compounds with other elements. Lanthanum, cerium, praseodymium, neodymium, and europium react with oxygen to form oxide coatings or tarnish after brief exposure to air. Because of their reactivity, pure lanthanides are stored in an inert atmosphere, such as argon, or are kept under mineral oil. Unlike other most other transition metals, the lanthanides tend to be soft, sometimes to the point where they can be cut with a knife. None of the elements occurs free in nature. Moving across the periodic table, the radius of the 3 ion of each successive element decreases. This phenomenon is called lanthanide contraction. Except for lutetium, all of the lanthanide elements are f-block elements, referring to the filling of the 4f electron shell. Although lutetium is a d-block element, its usually considered a lanthanide because it shares so many chemical properties with the other elements in the group. Although the elements are called rare earth metals, they arent particularly scarce in nature. However, its difficult and time-consuming to isolate them from each other from their ores, adding to their value. Lanthanides are valued for their use in electronics, particularly television and monitor displays. They are used in lighters, lasers, superconductors, to color glass, to make materials phosphorescent, and to control nuclear reactions. A Note About Notation The chemical symbol Ln may be used to refer to any lanthanide in general, not specifically the element lanthanum. This may be confusing, especially in situations where lanthanum itself isnt considered a member of the group!

Plural But Singular in Construction

Plural But Singular in Construction Plural But Singular in Construction Plural But Singular in Construction By Mark Nichol In the dictionary, when you’re looking up a noun that ends in s, you’re apt to find a notation like this: â€Å"noun plural but singular in construction.† What does that mean? This description refers to words like news that appear to be plural but take a singular verb (hence the word construction, meaning â€Å"sentence structure,† not â€Å"appearance†). One category of words plural in appearance but singular in use is that of intellectual pursuits and their associated academic disciplines: For mathematics, physics, and the like, we use a singular verb: â€Å"Mathematics is difficult for him†; â€Å"The physics is staggeringly complex.† However, similar terms may use singular or plural verbs depending on the sense: â€Å"Statistics is not my favorite subject†; â€Å"The statistics are valid.† In other contexts, usage varies. Gymnastics is treated singularly (â€Å"Gymnastics is an Olympic sport†), but calisthenics takes a plural verb (â€Å"Calisthenics are boring†). Both words refer to a routine of physical activities, but noun-verb agreement is inconsistent. Some words that are plural but refer to a unified pair of objects, such as (eye)glasses, pants, and scissors, are nevertheless associated with plural verbs: â€Å"My glasses are missing†; â€Å"These pants have gotten too tight†; â€Å"The scissors are dull.† Words in several other categories are categorical exceptions: Proper names, composition titles, and words used as words are always singular, even if they are plural in form: Acme and Sons is a highly rated company. Spats is a downtown bar. Demons is a terrible movie. Shades is a best-selling novel. Hits is an informal word meaning â€Å"search returns.† Aussies is a nickname for Australians. A few words appear to be plural but are in fact taken directly from other languages in which s at the end of a word does not denote a plural form. For example, biceps (from Latin) is singular, though many people refer to the muscle in the front of one upper arm as a bicep, and kudo (from Greek) is widely employed as the singular form of kudos meaning â€Å"praise† or â€Å"prestige† though the latter form is singular. (Bicep and kudo are back-formations linguistic innovations of varying legitimacy but are not advisable in formal writing.) Rarely, you’ll see a word that is plural in both appearance and usage, though the literal meaning of the word is singular. For example, whereabouts means â€Å"location,† but one writes that a person’s whereabouts are unknown (even though a person can be in only one location at once). Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Grammar category, check our popular posts, or choose a related post below:45 Synonyms for â€Å"Food†The Six Spellings of "Long E"50 Synonyms for "Song"

Special Education Needs Essay Example | Topics and Well Written Essays - 2500 words

Special Education Needs - Essay Example Special Education Needs (SEN) refers to that extra or different wants of children will have due to the fact that such experience unusual learning difficulties something which lead to such children to experience difficulties not only in learning but also having an equal access to education, training and even work opportunity. Besides, language difficulties such children experience, numerous challenges, difficulties in cognitive process, and behavioural difficulties as well as psychomotor difficulties. The inclusion debate has also been concerned with the continuity dilemma for children with special needs given the fact that most children with special education needs find it hard to fit in the higher education levels as a lot of government help has in the past been given to the primary level (Audit Commission, 1992). This imbalance has created a different kind of treatment for children with special education at primary school level and different treatment when such children graduate into higher levels of education. This has been a challenge and has been fronted as a main argument by the proponents of the inclusion debate who argue that inclusion will put the children with special education need at an advantage in that if they are integrated into mainstream classes, as opposed to specialist schools, they will advance their chances of performing well at higher levels of education (Copeland, 1991). Children with special education needs are more likely to miss opportunities of higher education, as there are no sufficient numbers of higher-level education institutions, which offer specialised education (Brown, 1994). Therefore most children with special education end up getting admission to mainstream universities and colleges where special treatment is not high compared to the primary level of education. There is a need to include or integrate children into mainstream classes early enough so as to prepare such children to fit normally in mainstream colleges and universities. Children who attend specialist schools are more likely to take a long time to fit into the mainstream colleges and universities than children with special education who attended mainstream schools early in life (Allen, 1994). Specialist schools have been negatively viewed as being associated with the disadvantaged, the less fortunate, the mentally ill, the deaf and such negative labelling which can affect the self-esteem of children with special education needs. Therefore specialists' schools meet the immediate needs of the children at primary school level but do not prepare the children for challenges associated with higher levels of education. The other challenge for those children who attend specialist school is that the children may get used to specialised treatment due to the availability of special equipment and specialised staff. This is lacking in most institutions at higher levels of education and such children are more likely to experience problems in future when trying to change and fit into a mainstream class. The debate surrounding special education needs has been surrounded by controversies in agreeing to what constitutes of special needs, what to be included and what not to include. This has led to debate on whether some conditions such as dyslexia were

Presentaion on the country Syria Essay Example | Topics and Well Written Essays - 1000 words

Presentaion on the country Syria - Essay Example It is currently the liturgical language of many Syrian Christian denominations. However, most educated Syrians also speak French and English. The indigenous Christian Western-Aramaic speakers as well as Assyrians make up roughly 400,000 people. Most of them speak the Western Neo-Aramaic language. As for the deaf community, the sign language is used. Traditionally, men wear long gowns and women wear a long robe that only leaves their feet and hands exposed (Antoun 89). These dresses show little of the human skins something which is considered respectable. Music: Syria is one of the earliest centers of Christian hymnody and continues to be the liturgical music of various Syrian Christians. Damascus is among the Arab world centers for artistic innovation, particularly in the field of classical Arab music. Prominent musicians such as Asmahan, Lena Chamamyan, and Farid al-Atrash all come from Damascus (Salamandra 104). Aleppo city is known for its muwashshah; a form of Andalous poetry (Antoun 45). The muwashshah was popularized by stars like Sabah Fakri. It comprises of 5 stanzas that alternate in refrain with a running rhyme. Dance: As cited by Salamandra (103), the Syrian traditional art is manifested in dances like the Dabkeh, al-Samah, and sword dance. The Dabkeh is the national dance of Syria. It involves both line dancing and circle dance. It is commonly performed at weddings and other festivities. The lines usually form from right to left. The Dabkeh and al Samah are also peformed in child’s birth and marriage ceremonies. Food: Core element in parties, weddings, and other festivities. The main dish is the Syrian cuisine. It is rich and varied in its ingredients. It comprises of Kibbeh, fattoish, tabbouleh, hummus, labneh, shanklish, sujuk, baklava, and pastrirma. Manoushi bread is the number one snack food all around Syria. Tea is the ever-present drink and is usually taken with the Manoushi bread in

Identification the Stages of C elegans Lab Report

Identification the Stages of C elegans - Lab Report Example Most molecular genetics experiment cannot be employed on humans because of their complexity. In order to perform these experiments, researchers use certain model organisms which can be cultured very easily in the laboratory and is easy to manipulate. These model organisms though physically different from humans bear certain biochemical and physiological features that have been conserved during evolution (Hedges,2002, p838). With this respect, the nematode worm Caenorhabditis Celegans offer certain exceptional advantages and is one of the foremost model systems in molecular genetics. In order to study gene function in model organisms, single gene mutations are introduced and phenotypical characters are analyzed. The result of this analysis may vary-some of these single gene mutations would produce drastic biochemical or structural differences while others may go silent when compared with the wild-type phenotype (Fire at all,1998). Background of RNAi RNAi (RNA inference) also known as post-transcriptional gene silencing is a biological process which down-regulates expression of the targeted gene. Exogenous dsRNA could induce potent and sequence-specific silencing of endogenous gene expression in C.elegans (Fire et al,1998) i.e. intentional introduction of dsRNA into any organism, the difference in traits as a result of gene silencing may be observed. Worms as a model system: Most molecular genetics experiment cannot be employed on humans because of their complexity. In order to perform these experiments, researchers use certain model organisms which can be cultured very easily in the laboratory and is easy to manipulate and Celegans is an ideal organism because of the following characteristics: It is a eukaryote Genome size is small (97 Megabases) Small lifecycle Easy to maintain in laboratory (Gilbert,2000) Gene that we studied: The entire genome of C.elegans has been sequenced and therefore we have a clear understanding about the genes. We used 4 mutant with different genes suppressed so as to try and understand the role of the genes in the wild C.elegans. The genes are day-10, roll-6, by-1, and unc-22.  Material Required: Mutant worms on NGM-lite plates Wild-type worms on NGM-lite plates Binocular dissecting microscope Methods: 1. LAB1-part 1- Plates with wild worms are seen under microscope and behavior is observed. Life stage of microscope and drop on the plate to induce movement. Tapping the plate may also be required to induce movement. Observation of lifecycle is made. 2. LAB1-part 2 Both mutant and wild types are observed under the microscope and morphological and locomotor differences between them are observed and recorded. 2 E. coli are used as the food source for C.elegans. C.elegans are propagated on the lawn of E-coli on NGM-lite medium. The worms are propagated from plate to plate by the process of chucking and picking. Chucking and Picking Chucking is a rapid way of transfer and involved cutting out a portion of the NGM-lite medium where E. coli food source had been consumed and transferring it on a new plate. Picking involves transferring of individual worms with the help of flattened tip of a platinum wire.

Module 5 Discussion Questions Article Example | Topics and Well Written Essays - 500 words

Module 5 Discussion Questions - Article Example Interoperability among all hospitals in the United States cannot be reengineered if there is no data (Kleinke, 2011). There is no doubt that America cannot truly reform its healthcare delivery, and that America will never be able to attain real accountability of quality and cost until they have healthcare data, which are computerized effectively. Trying to set up a well functioning and accountable data system is an endeavor in futility (McGlynn, 2010). It cannot be done just like that, but healthcare policymakers can come up to regulation which the congress can consider liable to the healthcare sector. Computerized healthcare should be a top priority if this nation wants to achieve interoperability in their nation. Healthcare, in this 21st century, cannot be reconstructed without computerizing it. In order for hospitals to diagnose their patients on time, they need to incorporate computerized systems. It will help them in working fast (Kleinke, 2011). One of the world’s leading database vendors is Google Inc. Google, unlike other database vendors, comes up with innovations that other database vendors cannot create. They are considered leaders of everything (Boulton, 2012). According to research, the Google database system can overcome a majority of network latency issues in keeping and retrieving data globally across computers in the organization’s dozens of data centers. Google’s database system was intended to improve the organization’s services to businesses and consumers, but could also be offered as a service to clients using cloud computing to store their information, or even as a cloud-based information analytic engine. One of the advantages of Goodge’s database system is that data can be transported to other storage equipments and underutilized computing, and can be duplicated in computers across numerous data

Answer questions Assignment Example | Topics and Well Written Essays - 250 words - 8

Answer questions - Assignment Example Groupon promise affects the consumers through high promises and values with regard to the risks. It offers them return on value. It also offers them returns in case of damages or other losses incurred. In case of cancelation of flights, or other unseen circumstances, Groupon Promise guarantees money back value and fixed percentage returns (Groupon). Groupon impacts the consumers decisions based on the market trends. They target the areas, products and services that are in and in the demand zone of the clients. They assure top quality services and in return refunds in case of poor services and products against a given package and scheme. Consumers on the other hand take into account factors such as refund, the benefits, the comparative analysis as drawn by comparing other services offering companies. The brand name and quality delivery on account of the past services and records is another area that makes up for the consumers decision making factors

Christopher Columbus, journal excerpts and letter Essay

Christopher Columbus, journal excerpts and letter - Essay Example The sojourner reached remote islands and places. He named the first island found San Salvador in honor to Lord and Saviour who gave such ‘miracle’ (Cohen, 1992, p. 115) although natives called it Guanahani. The second island he has gone to was named Santa Maria de Concepcion, the third was â€Å"Fernandina† and the fourth was â€Å"Isabela†. The fifth island was named â€Å"Juana† (Cohen 1992 p. 115). What catches Columbus’ attention as he makes and encounters the native islanders? When Columbus met some native men gathered he immediately took notice of their masculine features, long hair and bodies painted in black, red and white. His compassion made him think that these persons should be converted to Christianity â€Å"by love and not by force†. (Cohen 1992) He also noticed that there were villagers who immediately left their homes when the ships were seen to have arrived in the area. In his report, he described his amazement at how these people received their gifts and their strong interest in material things was illustrated by how the natives immediately put these materials on their body (Mar, 1996).

Answer questions Assignment Example | Topics and Well Written Essays - 250 words - 8

Answer questions - Assignment Example Groupon promise affects the consumers through high promises and values with regard to the risks. It offers them return on value. It also offers them returns in case of damages or other losses incurred. In case of cancelation of flights, or other unseen circumstances, Groupon Promise guarantees money back value and fixed percentage returns (Groupon). Groupon impacts the consumers decisions based on the market trends. They target the areas, products and services that are in and in the demand zone of the clients. They assure top quality services and in return refunds in case of poor services and products against a given package and scheme. Consumers on the other hand take into account factors such as refund, the benefits, the comparative analysis as drawn by comparing other services offering companies. The brand name and quality delivery on account of the past services and records is another area that makes up for the consumers decision making factors

Research Assignment Example | Topics and Well Written Essays - 1750 words - 1

Research - Assignment Example Interviews: Are a good method of data collection as they are in the form of a one on one conversation and both the interviewer and interviewee play an important role to come up with a solution to the problem or the research study topic: Interviews are useful in communicating on deep and lengthily research topics as they provide more insight to a problem and they open up a good platform or discussion between the interviewer and interviewee. They produce a higher response rate from the interviewee. Lastly the data collected has a high probability to be accurate as compared to the other qualitative research methods. Some of the disadvantages of interviews include. First, the interviewer may not deduce the right data if they are not consistent with the questions. Secondly, it may be time and energy consuming setting up the interview. Thirdly, interviews are best done on a one on one perspective, thus limitation in the numbers. Fourth, great interviews require great and skilled interviewe rs. Lastly the interviewer may ask biased questions and get the wrong replies thus could lead to a complication in the data collected (MBAOFFICIAL, 2010). What is the importance of interviews with regard to the business research topic? Interviews are used so as to find out information from customers about the products that are recommended and their importance. The main question a consumer could want to know from the company is whether the products do work or not and if they have a guarantee on safety. Interviews can act as a form of gathering information from the company that manufactures the product and can be used to enhance a discussion and share the benefits of using the products, thus the interview in this scenario acts as a point of creating awareness about the product to its consumers. When the consumer wants to know more about the nutritional products that they can use and supplement, interviews on the product(s) can be used to give such information in depth and with clarity . Focus groups: Are also referred to as focussed interviews or group depth interviews are structured in a manner where a group of people are asked more information about their opinions about a particular topic, product or idea. This is an open kind of discussion with the other members in the group. The researcher in this case their work is to give opportunity to people to speak and air their views and the researched also manage the group or acts as the group moderator. The advantage of a focus group is the personal experience and touch of experiences shared among the members. They do provide information based on experiences. Secondly, if a company has new products that it want to project to the market, focus groups could be used to test the product and get the opinion of the product entry in the market and acceptance by other consumers. Thirdly, if a product company wants to introduce a new product to the market, then a focus group is better place to determine the competitors and al so come up with solutions that could help keep at par with the competing product in terms of packaging, pricing and advertisements. The disadvantage of this is that the researcher has little control over the group as compared to a one on one interview. A second disadvantage is that too much time can be wasted on issues that are not relevant to the topic. Thirdly, the information collected may not be related to the topic since the group members may add additional comments to

We Can Never Can Tell Essay Example for Free

We Can Never Can Tell Essay It’s funny how things always turn out different than how we expect or want them to. It becomes funny eventually but for the most part, it’s hard. In some cases, painful at first. I am always caught saying â€Å"we can never can tell†. Sometimes, it’s just my excuse and sometimes, I just like saying it because it sounds nice but there is truth to it. Whoever knows what will happen next? Whatever is â€Å"next† – the next time, next person, next tragedy, next tear, next smile. We can plan, predict, speculate, estimate†¦ but truth is, we really can never can tell. Otherwise, where’s the fun in that?†¦ is what they say. Honestly though, don’t you sometimes wish to know what’s next for you in life? Much more, where are all of these life struggles and adventures leading us to? Where am I going to end up? With who? It’s not like you want to impatiently fast-forward to the end of your life but you just want to know if in the end of all these crisis and drama, everything is going to be alfckingright just like what they always tell you when you’re shitfckin depressed. You just want to know if having to struggle today means having a bright future tomorrow or will it be a recurring struggle, or worse, an endless pit of struggle. It’s not fair nor is it right to question life and its purpose but wouldn’t that be nice? A little bit of assurance would be nice. Lucky are those who have their future stable and planned out perfectly fine even before they were born. Trust fund babies, children or relatives of influential people, political dynasties, celebrity children, children of multimillionaires, even those who were born with beautiful genes, because that actually makes their lives easier (feel free to disagree). ***Please don’t refer or send me a copy of The Purpose Driven Life because somebody already did, thank you. On a semi-irrelevant note (depending on how you comprehend it), I have learned that the lack of choices makes you a better person or to put it more rationally, makes you better at what you do. Giving yourself choices is tempting yourself to easily quit one decision and move on to the other instead of making things work; whereas when you’re stuck with only one, you have no other choice but to move forward, make it last, make it work, therefore you strive to be better. Having choices opens up opportunities for comparison, and comparison never leads to contentment and happiness, from what I know. Having a job while knowing that there are still hundreds of available other jobs will make it hard for you to value and stay in your current job (pardon my confusing sentence). You will always wonder what the others has to offer and how you could be wasting your time doing what you think you don’t deserve, instead of working hard to succeed in it and make things better. Having a girlfriend while knowing that there are still hundreds of available other girls who could be sexier and more attractive than her will make it hard for you to be faithful and contented. Especially when you’re fully aware that you’re a good-looking sonuvabitch who thinks you can have any girl you want. You will always wonder if there is someone or something better for you hence disregarding the notion that you may actually have in your hands the best choice. Am I right or am I right? Choices are fallbacks. It’s easy to quit, to let go, to turn around, to give up, to not try hard, when you know you have a fallback that conveniently catches you anytime, everytime. Contentment is inversely proportional to our number of choices (and I realized that just now). The more choices, the harder for us to be contented†¦ and happy. Feel free to disagree.

Energy Alternatives: Oil Essay -- Iraq Oil War Energy Essays Papers

Energy Alternatives: Oil Every day the world burns more that 80 million barrels of oil. By 2016, estimates believe that oil consumption will rise to around 100 millions barrels a day. (Oil Facts) The United States was responsible for 25% of the world oil consumption in 2002, and those numbers are rising. (Oil Demand) As demands increase and the supplies of oil continue a rapid depletion, large political powers in the US struggle to keep their heads afloat. Many conspiracy theories have dabbled in the pool of scandal within the Whitehouse’s knowledge of September 11 before it happened, and George W. Bush’s master plan to wage a â€Å"War on Terror†, with a backdrop of draining the last of the oil supplies from the mid-East. Every conspiracy theory needs to be taken with a grain of salt, but it is important to remember our past. It was only until long after the Vietnam war that people were told of the pre-knowledge of utter lack of any possibility for them to win the war, yet officials still pressured our armies into Vietnam until near extinction. In 50 years, we will all know the real deal behind September 11th and George Bush’s strong motives to pursue the War on Terror (even when the rest of the world advices against it.) The US is a country with one of the most unhealthiest addictions possible: oil. Just as a heroine addict who is running low on fixes, the US is running low on supplies, and drastic, unwise measures are being taken in order to sustain this addiction for just a bit longer. This enters the Enron-Cheney-Taliban Connection, which has startling information that aligns a bit of history prior to September 11. The mother of all oil support and scandal rests with Enron, however, witho... ...ependency on the mid-East, bring our troops home, and make for a better future for our children. â€Å"Is the White House covering up that it was molding foreign policy as well as energy policy to suit Enron? Did the Bush Administration know that Enron's collapse was coming as early as August? If any of these are true, the largest bankruptcy in American history may well connect with the greatest political scandal in American history.† (Callari) Bibliographies: Callari. The Enron-Cheney-Taliban Connection. 28 Feb 2002. 14 Feb 2007. Albion Monitor. Oil Demand. 2006. 14 Feb. 2007. Interesting Oil Industry Statistics. Oil: Facts Behind the Fiction. 25 May 2006. 14 Feb. 2007. BBC News.

Poem lucifer In The Starlight: New Meanings And Ideas :: essays research papers

Poem "Lucifer in the Starlight": New Meanings and Ideas Examining a poem in detail can bring out new meanings and ideas. By careful analysis, the full beauty of the poem can be appreciated. The poem "Lucifer in Starlight (p. 959)", by George Meredith, can be analyzed to refine the authors purpose, by examining every subtle hint, every possibility, for a deeper theme. Also, "deciphering" formal literary techniques such as metaphor, connotation, and symbolism is the key to unlock other expressions. The main theme of the poem is that Lucifer has no place out of his hell, and anything he tries to reenter heaven is futile. As with any poem, it is best to first examine how the title, "Lucifer in Starlight" relates to the body of the poem. Obviously, Lucifer is the defiant angel that was banished from heaven, and sent to the underworld of hell, where he known as Satan. The title refers to the devil as "in starlight", so this means he has to rise to a place where the stars are visible, not the fires of hell. This rising from the underworld is summed up in the first line. It is later explained that he is doing so because he is tired of his ‘dark dominion." Ironically, the first line refers to Lucifer honorably, as a "Prince", while in the second line he is tagged as a fiend. This leaves the reader feeling perplexed, yet still thinking of Lucifer as the enemy. At first it may seem as Lucifer has risen to the Earth, but it is further clarified that he has elevated himself above the "rolling ball". However, god imagined the world as planar, with heaven on a higher plane, and hell on a lower plane, not spherical as defined here. From his place in the stars above earth, Lucifer looks down through the clouds, and observes the sinners. He is talking about the denizens of the earth, for since Adam sinned in the beginning, all of his sons and daughters are also sinners. Perhaps he can relate to them, as he is also trying for entrance to heaven. For now , he sets his mind on the people who will become denizens of his hell eventually. Here Meredith shows how much hubris the devil really has, for the reader can just see Lucifer savoring over the masses entering his vile domain. Then, Lucifer peers at the most extreme places in the world, describing the sands of Africa. The Sahara desert with its barren, endless, undeveloped sand can seem like hell to anybody.

System Integrity and Validation

Preface Kudler Fine Foods located in San Diego, California is a specialty food store that is continuing to grow. Due to the company’s growth, it is necessary for Kudler to make a better use of technology for all aspects of the business. Currently Kudler process a large amount of data through computer programs which is used between all three locations, but with upcoming expansions, Kudler needs the ability to track all of that information and also be confident that the information is reliable. With that being said, Kudler would benefit greatly from Computer Assisted Auditing Techniques (CAATs).It is recommended that Kudler use CAATs, because it will assist with streamlining the IT audit process. CAATs are techniques that â€Å"are used to increase the efficiency and effectiveness of the audit function† (Hunton, Bryant, & Bagranoff, 2004, pg. 178). Not only will CAATs assist with making Kudler’s audits go more smoothly, but it will also assist auditors with obtaini ng more reliable, relevant, sufficient, and useful information. There are 10 key steps of CAATs that can be implemented that will assist Kudler in creating a framework for their audits. CAATs are divided into two techniques that will be beneficial to Kudler.The first is validating application integrity. The purpose of this technique is to find whether the source code has been compromised. Verifying the overall integrity of the applications is the second CAATs technique. This technique’s objective is to ensure that the data was imported correctly and also to find any irregularities within the data. Due to the fact that the business continues to grow, the use of CAATs will only assist Kudler in its growth. If Kudler goes with the recommendation to incorporate CAATs, it will assist in streamlining the auditing process. System Integrity and Validation Recommendations were made to Kudler to implement CAATs into the auditing process. This implementation will be beneficial to the co mpany as far as validating and verifying information. The use of audit productivity software would allow an organization to streamline and automate processes. Organizations can take it a step further and use audit productivity software to assist with the design of computer software. The following brief will discuss CAATs and audit productivity software. Computer Assisted Auditing TechniquesComputer Assisted Auditing Techniques (CAATs) can be used to both validate application integrity and to verify data integrity. Data validation determines whether the source code has been compromised. The applications can be validated through test data, parallel simulation, or integrated test facilities. Test data is simply fabricated data entered into the system by the auditor to test the integrity of the system. For example, the auditor may process a payable through the system by creating a vendor and entering an amount to see the process of actually cutting a check from the system.An integrated test facility (ITF) can test applications as they are used on a daily basis. â€Å"The ITF approach integrates the auditor’s contrived test data through the client’s system along with the normal transaction processing† (Hunton, Bryant, & Bagranoff, 2004, pg. 189). During the ITF process, auditors must ensure that the client’s data is not corrupted. All information entered into the system by the auditor should be reversed. Verifying data integrity is ensuring that the data was imported properly and without any irregularities.There are a number of audit tools that can be used to assist with verify integrity such as extracting data, importing it into ACL, and stratifying. Detecting fraud is important when verifying integrity. Audit Productivity Software Functions Audit productivity software provides computerized audit solutions and allows companies to manage and keep track of audit reports. Audit productivity software has a number of functions such as measur ing productivity, resource optimization, data management, and automation. Measuring productivity is simply appraising the performance of the organizations audit reporting.By using audit productivity software, auditors and clients are able to get the best use of all of their resources. For example, each staff member’s time will be used adequately. The auditors’ time will be focused on testing the information in the system, instead of spending hours of time sorting through information deciding what to test. The clients can spend their time completing auditor requests. Data management allows auditors and clients to keep track of all of the information entered into the system by the auditors as well as original information entered by clients.Audit productivity software also allows for automation of the auditing process. Information in multiple systems can be integrated with audit productivity software. Automation can streamline the auditing process for any organization, an d as mentioned previously, it can increase productivity of not only the auditor but for the client as well. Using Audit Productivity Software for System Design Using the audit productivity software can be beneficial when designing systems for an organization.Audit productivity software can assist with minimizing discrepancies between the company software and the actual audit software. The use of audit productivity software provides functionality to the audit process. That same software could be used to help with the design of an organization’s software systems. Software such as electronic working papers, groupware, and time and billing software can all be implemented when designing software systems. If groupware is implemented these systems would have the ability to not only share files, but schedules and calendars as well.Time and billing software is implemented, auditors can better track time spent within that system according to their unique login. Implementation of electr onic working papers assists with everything from daily journal entries to financial statements. Using this software to create a framework for the design of new software would only ensure that audits went smoothly. The audit process can go with little to no incidence, if organizations and auditors would use computerized audit techniques, and audit productivity software.Both the CAATs and the productivity software assist with creating a more automated process. As audit automation increases the time and energy put into the actual audit decreases. Organizations as well as auditors can be more confident that the audit material is reliable and efficient. ? References Apollo Group, Inc. (2011). Kudler Fine Foods. Retrieved from https://ecampus. phoenix. edu/secure/aapd/cist/vop/Business/Kudler2/internet/index. asp Bagranoff, N. A. , Simkin, M. G. , & Strand Norman, C. (2008). Core concepts of accounting information systems (10th ed). New York: Wiley & Sons.

How would you describe Akio Toyoda’s leadership style?

Leadership is the process of directing the behaviour of others toward the accomplishment of some objective. Leadership style is the behaviour a leader exhibits while guiding organization members in appropriate directions. Today leaders are often eliminate unnecessary levels of organization and introduce work teams in order to enhance organizational decision making and work flow. In this case study, Akio Toyoda’s prove himself as today’s leader by making few necessary changes in organization to boost his way to make Toyota as number one auto maker in the world. Entrepreneurial leadership Akio Toyoda can be categorized in entrepreneurial leadership because of his critical role in Toyota. Toyota must have global outlook, interact with environmental changes to make its way to the top. Akio Toyoda as a senior managing director and was appointed as head of china business, when it was joint venture with troubled firm. He is impatient to see faster growth of business in China, work hard for a year to complete the merging of Toyota with a larger, more aggressive local firm by convincing top management and government officials to approve the deal. Once he succeeded, Toyoda’s next step was to revamp the management structure. Transformational leadership Akio Toyoda also can be categorized in transformational leadership by studying his action toward management structure he created. In China’s country department under his leadership, departmental heads will only answering to headquarters executives which isolated the managers and complicated coordination. This method making way for them to work closely with each other and report to an executive vice president who can make decisions for the China business instead of waiting for the corporate approvals. ) Where on the continuum of leadership behaviour would you place Yoshi Inaba, and why? Continuum of leadership behaviour that emphasizes decision making can be arranged into 7 type of behaviour: 1. The manager makes the decision and announces it 2. The manager â€Å"sells† the decision 3. The manager presents ideas and invites questions 4. The manager presents a tentative decision that is subject to change 5. The manager presents the problem, gets suggestions and then makes the decision 6. The manager defines the limits and asks the group to make a decision 7. The manager permits the group to make decisions within prescribed limits Yoshi Inaba helps Toyota managers grapple with decisions about balancing market share and profitability. He can be placed in and as the manager, who permits the group to make decisions within prescribed limits in the continuum of leadership behaviour. Yoshi Inaba can be characterized as a leader who makes decision by exercising little control and allowing subordinates much freedom and self-direction. He is becoming an equal member of problem solving group which is allowing his managers to fact finding some solutions in balancing market share and profitability, bring it in discussion and finding the best achievable solutions. The best example in this context is when an official from the U. S division described about competitive price cuts and warn him about the sales and profits which could be affected if he couldn’t give discounts for the rental car companies that buy in volume. He participates in discussion and suggested alternate solution by selling to businesses that buy in volume which contribute to higher profit opportunities. â€Å"Maybe we lose in terms of total volume,† but that’s acceptable because â€Å"it’s all about return† this quote explain to us of his participation and his way of acted as equal member in finding solutions.

Marketing – Converse Case Study

Converse Case Study Creating a marketing strategy isn’t always about taking a hands-on approach and facilitating how consumers should think of a certain brand. Converse All Stars took an alternative route, a â€Å"stand-back approach† giving its customers control over marketing its shoe brand. As a result, Converse delivered a customer-brand relationship where the needs, wants and demands of its customers were met by a pair of All Star Chucks.The needs, wants and demand of customers is a major customer and marketplace concept. Human â€Å"needs† are states of felt deprivation that could be of a physical need like for food and clothing, social need like for affection or individual needs like for learning or self-expression. Wants are forms of needs that are derived from cultures and individual personality (i. e. specific types of food like Asian, American or Mexican are specific wants for food).Demands of customers are also factored in when customers’ wants are supported by their ability to make purchases. Relating this to the Converse case study, Converse’s customers demonstrated a physical need for clothing or shoes in this case as well as an individual need for self-expression, and their wants were derived from Converse’s simple, affordable and classy style and â€Å"no-brand† brand, a specific culture and type of personality that consumers affiliated with Converse.Converse’s culture of self-expression became the reason why it was wanted and thereby demanded by consumers who had buying power. Converse understood this concept well as it was able to capture value from its customer by enabling them to customize and individualize their pair of Chucks, thus creating a market offering that became an integral part of Converse’s marketing success.

Peer Pressure Essay Example | Topics and Well Written Essays - 500 words

Peer Pressure - Essay Example I asked him if he had discussed this matter with his parents, to which he replied that he felt embarrassed discussing it with them. So he had not shared his problems with his parents thus far. He did not know what he should do about this problem. He told me that he had done some research about this problem on the internet and had learnt that the problem can be treated with a mild surgery if it does not go away with age, though he was not sure if he would ever get the surgery done. He said that he had always let his parents decide things for him, and could not take decision as an individual. This boy adjusts in the stage of identity diffusion of Marcias theory of identity development as he does not have a sound ability to make rational choices and is not sure how to come out of the problem. My second interviewee was a sixteen year old girl. When I asked her about the most significant challenge she was facing, she replied that she did not feel safe, or at least content with the co-educ ation system. She said that her male class fellows would more look at her body than into her eyes while talking to her. She said that she felt offended at this disgraceful behavior of her male class fellows.

Using Business Intelligence to Determine Social Network Essay

Using Business Intelligence to Determine Social Network - Essay Example Business intelligence mainly focuses on the processes and applications that happen within the business as opposed to competitive intelligence which focuses on the external environment, competitive activities especially. One main characteristic of business intelligence is its reliance on facts as opposed to rumors and heresy. Business Intelligence can be used to analyze people’s social networks to an extent that it may impact on organizations’ performances. This paper focuses on the application of business intelligence in analyzing social networks and its potential effects at the organizational level. Business Intelligence and Data Businesses depend on information form the field, which is translated into data, to make strategic business decisions. In many cases, businesses generate data which they store in databases, flat files or spreadsheets. The data that is stored by any business is extremely important to the organization especially if it is properly analysed and uti lized (Inmon and Nesavich 2008). In other words, the data stored by a business should not simply be perceived as information recorded in the past. It should be used for example to monitor sales trends for the purposes of planning market campaigns or to establish the kind of resources that ought to be allocated to certain sales teams. Such information could also be analysed to establish market trends and products that enjoy viability in the current and future marketplace. Yet again, information stored by the business may be used to analyse customer behavior (Negash 2004). Better stated, information can be analysed by organizations to increase profits and maximize revenues through the application of business intelligence. Social Networks A social network is basically a structure that is constituted by a set of actors who are engaged somehow in their interactions, connections or relationships (Liebowitz 2007). In other words, social networks are commonly associated with social groups. The actors or players in a social network may be individuals, businesses or organizations acting at a local, communal or even global level. What this means is that a social network is a group of individuals or organizations that interact with shared goals. While social networking can be done in person, most of the activity is done online. This is the case considering that the Internet is accessed by millions of people with common interests. Websites are commonly used for social networking as online community members who have common interests, or share related views in politics, religion, or hobbies meet and share views and ideas (Liebowitz 2007). Some of the most common and visible social networks in the current business environment include Facebook, Twiter, LinkedIn, MySpace, Google Plus+, Orkut, Tagged, Badoo, and myYearbook, just a few mentioned. While social networks have a great share of advantages, their limitations cannot be undermined. Data theft, frauds and viruses may be p art of the social networking experience. Business Intelligence and Social Networks Any organization that applies business intelligence cannot underestimate the potentiality of the application. Business intelligence can measure and report a vast amount of data real time (Respicio, Adam, and IOS Press 2010). Business intelligence may be used to harness trends, and create business to business and business to customer relationships on social networks such as Twitter and Facebook. The data retrieved from social networks can effectively be

Read the documents carefully and you will able to know what I want Essay

Read the documents carefully and you will able to know what I want - Essay Example Incorporation of quality management in software development lifecycle ensures that there is high quality product at the end. This in addition ensures that the clients are satisfied and contented. This evidence shows that the aspect of quality management needs not to be neglected in software development project lifecycle. The major reason for incorporating quality management in software development projects is to ensure that quality standards are upheld throughout the development process (Sue Carroll 2007). Quality management is also aimed at developing quality end product which satisfies and meets the specific users. In order to understand the relationship between quality management and the success/failure of software development projects it is important to understand the three core aspects of quality management which comprises of software quality assurance, software quality plan and software quality control. Software quality assurance (SQA) is the organizational quality guide in regard to software development projects (Smith 2001). These quality guidelines comprises of regulations, standards as well as procedures in coming up with quality end products, evaluation, verification and confirmation of work products in the software development lifecycle. This aspect also entails incorporation of knowledge base of the best practices. Software quality plan (SQP) is also another important aspect is a quality plan drafted by all the stakeholders of the software development team declaring their commitment to adhere to the procedures, regulations and all the applicable standards throughou8t the development lifecycle. It is the duty of the software development manager to approve and justify any of the necessary adjustment which deviates from the SQP Land SQA standards. Finally is the aspect of the software quality control (SQC) which ensures that both the SQA and SQP the software development is

Summarize Essay Example | Topics and Well Written Essays - 500 words - 5

Summarize - Essay Example Martha McCaskey’s task in the Silicon 6 project is not an easy one. She is under intense pressure from the senior management to have the project completed and an action plan delivered to the client. The pressure calls her to make personal sacrifices as well as compromises. She is even considering paying someone to do the project for them, only that it emerged successful. The client too has a great reputation; therefore, the firm cannot take chances with the project. The client is a manufacturer of semi-conductors from California, the issue at hand was that the company wanted to identify the technologies and the cost regime of a new product (chip) that has been produced by client’s competitors. Martha’s job is to coordinate the activities that will foresee that their client obtains this information. She is tasked with the role of finding the information from another consultant, Phil Devon. The challenge is to have the consultant give her the information, Martha is doubtful. According to McCaskey, there are two possibilities that can be appropriate in the achievement of this task. Firstly, Phil Devon can be required to give a number of options on how the chips are produced, this would include the ones that are being produced by the competitor. She thought it would be a good strategy to eliminate any suspicion. However, this would come at a cost of additional funding from the client. The option also relied on the willingness of Devon to provide the information. Secondly, there was the option of leaving the task to Chuck Kaufmann, a senior associate from her firm. He was more experienced in seeking market intelligence information. Despite the option considered, the project would affect Martha in one way or another. She opted to have an interview with Devon; she called and had an early morning interview with a man who was willing to help with the information. However, Martha felt guilty for

Is death denied in contemporary Australian society Provide examples to Essay

Is death denied in contemporary Australian society Provide examples to support your argument - Essay Example The emergence of hospices and palliative care teams has done much to improve this difficult area of healthcare. Nursing and hospice care professionals, rather than doctors and surgeons, are more routinely faced with dilemmas which related to the dignity of the person, and the way that psychological and social factors can impact positively or negatively on the experiences of patients, relatives and medical staff. This is an area which is less well researched, and the present paper considers the widely held assumption that Australian society generally denies death, and seeks to protect its citizens from facing up to the emotional consequences of death for themselves and their close relatives. At the present time there are heated debates about the ethical and moral issues surrounding death, ranging from support for medically assisted deaths, to vehement opposition of any intervention that could potentially hasten death. These are important issues which Australian society must tease out and openly examine if it is to provide the kind of end of life care that patients expect. The alleged tendency of Australian society to deny death could be seen as endangering attempts to improve end of life care. If people prefer to distance themselves from death, and to avoid talking or thinking about it then it is very difficult to work out what kind of treatment or care would be their ideal preference. For this reason it is important to consider attitudes and cultural values on a wide scale when considering medical and social processes. A medical service which is out of tune with the prevailing culture is unlikely to provide a sensitive and appropriate level of care. A closer look at this intriguing area of healthcare studies reveals that the whole â€Å"death denying† label may not be quite as accurate an assessment as it appears on first sight. Historians such as Jalland (2002) and Davis and George (1990) trace the evolution of Australian beliefs and customs from the ab original concepts of â€Å"The Eternal Dreaming† to the experiences of Australian soldiers in the First World War who were taught to repress the horrors of mass warfare with the so-called â€Å"stiff upper lip,† (Jalland, 2002, 306) and to a much more mixed modern situation where multiple ideologies and customs struggle for prominence. Despite a very evident diversity in modern Australia, this notion that the country is a â€Å"death denying† nation persists into the present day. Evidence for this â€Å"denial of death thesis† is found in the ideas of social scientists in the period from 1955 to 1985. (Zimmermann and Rodin, 2004, 121). Certain traditions such as elaborate funerals and mourning rituals for bereaved families were noted as being important markers of the transition from life to death, in earlier historical periods. In traditional Catholic societies, for example, it was usual to hold a wake to mark the departure of a beloved family member, fol lowed by commemorative mass celebrations. In Jewish societies there are similar commemorative events, and these rituals are deliberately communal and inclusive, providing a supportive framework for bereaved families to lean on while experiencing the first painful stages of loss. (O’Gorman, 1998, 1131-1132) The community as a whole took part in these rituals, and death in such a context

Mrs Alving in Ghosts by Ibsen Essay Example for Free

Mrs Alving in Ghosts by Ibsen Essay Through excessive parallelism and constant reference to â€Å"ghosts,† Norwegian playwright Henrik Ibsen portrays a view on the rewards of duty that clashes sharply with the accepted views of the time. In his native country of Norway, and indeed all around the world in the year 1881, ‘duty’ was seen as a powerful motivator in both religion and society. The abstract concept of duty was what constrained society into ‘acceptable’ boundaries, and people without a sense of duty were often shunned and rejected by their fellow citizens. Henrik Ibsen was well-known for his somewhat controversial plays. Just before writing Ghosts, â€Å"Ghosts† he wrote A Doll’s House about a young woman seeking to escape the bonds of duty. While the classic feminist story in A Doll’s House has a hint of hope for Nora Helmer, who decides to speak up for her own rights as a woman and as a human being, Ghosts seems to me to be the gloomy alternative, as Mrs Alving overcomes years of subordination to her immoral (and now deceased) husband. The woman, Nora, desires to free herself intellectually by breaking out of a marriage. Ghosts, in many ways, is an extension of â€Å"A Doll’s House†, with the main character Mrs. Alving acting as a future Nora. They are similar in some ways, but obviously they are both uniquely diverse. They play many of the same roles in their plays, and are probably the most similar two characters between Ghosts and A Dolls House. As literary critic Edward Boyer puts it, â€Å"In many ways Mrs. Alving is an older and more mature Nora, freer yet at the same time more bound. She too wanted to break out of a marriage once, but was sent back to her ‘duties’ by Pastor Manders, who thereby awakened the first doubts in her mind about transmitted doctrine. Ibsen focused his pieces on commenting on the often hypocritical sense of duty that people of his time supported. In his own words, â€Å"Ghosts had to be written; I could not let â€Å"the doll’s house† be my last word; after Nora, Mrs. Alving had to come. † Duty prompted her to create a life of lies, as she hid her husband’s alcoholism and other immoral acts. Duty prompted her to hide her husband’s pregnant mistress, and again to raise his daughter as her own. Even the names Ibsen gives the two women show the difference of hope in the two plays. In A Doll’s House, Nora is given a first name, and in fact she is listed by her first name in the written script whenever she speaks. In Ghosts, Mrs. Alving is seldom called by her first name (it is Helen), and rather is referred to as Mrs. Alving in the script when she has a line to say. She is regarded only as a wife, even ten years after her husband’s death. Ibsen utilizes many parallels between situations and characters in order to portray the desired results of duty and the actual results. Mrs. Alving can be compared to Mr. Engstrand, a hobbling old carpenter, and supposed father of Regina. Mrs. Alving is, obliged by her sense of duty, trying to gain control of her son Oswald upon his return home, while Engstrand attempts to evoke his daughter’s sense of duty so that she will come to work for him. According to George Meyer, â€Å"This parallel is†¦important because in the one case a father is trying to gain control of his daughter; in the other a mother, of her son. † Both characters also experienced a ‘commercial marriage’ in that Mrs. Alving married Captain Alving â€Å"for the sum of his fortune,† and Engstrand married his wife Johanna for a hefty bribe. Nora is a unique character, a kind not usually seen in most plays. She swings her mood often; she is either very happy or very depressed, comfortable or desperate, wise or naive. At the beginning of the play, Nora still plays a child in many ways, listening at doors and eating forbidden sweets behind her husbands back. She has gone straight from her fathers house to her husbands, bringing along her nursemaid which tells us that she hasnt really grown up. She also doesnt have much of an own opinion. She has always accepted her fathers and her husbands opinions. Shes aware that Torvald would have no use for a wife who was equal to him. But like many children, Nora knows how to manipulate Torvald by pouting or by performing for him. In the end, it is the truth about her marriage that awakens Nora. Although she may suspect that Torvald is a weak, petty man, she believes that he is strong, that hell protect her from the consequences of her actions. Then, at the moment of truth, he abandons her completely. She is shocked into reality and sees how fake their relationship has been. She realizes that her father and her husband have seen her as a doll, a toy to be played with, a figure without opinion or will of her own. She also realizes that she is treating her children the same way. Her whole life has been based on illusion rather than reality. Although she tried to escape from her marriage, the young Mrs. Alving apparently did not have a sudden moment of realization of her duties to herself, her own honor, or her own pride. If she did, we are not told hem; she continued to live as her husband and as society expected her to. By the end of Ghosts, however, when the effects of her husband’s life of duplicity are clear, the older and wiser Mrs. Alving has obviously come to regret her silence. Boyer states, â€Å"She sees now that it was the limiting conditions, the lack of true joy, a goal in life, and meaningful work which destroyed the best in her husband. She sees too that she h erself was the immediate cause of his ruin, because she had made life intolerable for him with her conventional morality of duty. Mrs. Alving can’t be blamed for staying in her marriage though. In A Doll’s House, Nora Helmer had a place to escape to. Her friend Mrs Linde would eagerly provide a place to stay and her best friend Doctor Rank had invited her company, and expressed his love for her. The conclusion drawn up by the end is this: the embracing and enforcing of a corrupt sense of duty and false pride by the collection of characters has led to the successful projects-chaos and dismay. This symbolizes Ibsen’s conception of duty and double standard for men and women in the society. He believes that mankind has ‘taken it too far,’ and duty has degenerated love into a purchasable commodity as illustrated by not only the brothel but by Mrs. Alving’s and Engstrand’s commercial marriages. The free-thinking duty-free artists of Paris live happy lives in wholesome homes, while the duty-supporting end up in broken homes where hypocrisy and immorality run rampant.

China Airlines Flight 611 Engineering Essay

China Airlines Flight 611 Engineering Essay China Airlines Flight 611, Boeing 747-200 aircraft, was flying from Taiwan Taoyuan International Airport Taoyuan Originally named as Chiang Kai Shek International Airport to Hong Kong International Airport in Hong Kong, a regularly scheduled flight on 25 May 2002. The aircraft was reported to be disintegrated in mid-air, and crashed into the Taiwan Strait just after 25 minutes after taking off, killing all 225 people aboard. The aircraft was popular around the world and was widely used for over 20 years. After which the accident happened, Taiwanese Authorities quickly launched one of the largest rescue mission of the country aviation history. The incident of the crash occurred between 15:37 and 15:40, local time, the aircraft disappeared from radar screens, assuming that it has experienced and in-flight breakup at FL350 (approximately 35,000 feet), in the Taiwan Strait, near the Penghu Islands. It was spotted by a military C-130 aircraft, approximately 23 nautical miles northeast of makung. The aircraft consists of total 19 crew members and 206 passengers. All was found dead after the crashed and the first body was found at 18:10. Some passengers were found floating on the surface of the ocean, while some remained strapped in their seats. Pieces of the aircraft were also found in the ocean and on Taiwan, as well as the city of Changhua. No signs of burns, explosives or gunshots were found on the wreckage by searchers, except that oil slicks were spotted. Section 2 Event The aircraft was popular around the world and was widely used for over 20 years. After which the accident happened, Taiwanese Authorities quickly launched one of the largest rescue mission of the country aviation history. More than a thousand people took part in it. Fishing boat, coast guard and Taiwan military race out to the sea. The aircraft was found 55km away from the Taiwanese shore, north of the Penghu island where it disappeared. Great amount of wreckage, including landing gear wheels, are found on the ocean. Wreckage of the plane was spread far and wide. Some items are found on land, and some were more than a 100km away in Central Taiwan. As the rescue team continues, Taiwan Aviation Safety Council begins its investigations into the crash of the 22 year-old plane. It was reported that, there is typically one major accident happens every four years, for China Airlines, and this particular accident was so far the most difficult one. The search for survivors goes around the clock. There were 225 people on the airplane, however, none was found alive. Bodies were taken to the Penghu Island to be identified and examined. The National Transportation Safety Board (NTSB) then joins the investigation, and a team of investigators was dispatched to Taiwan. Investigators wants to know how one of the most successful and popular airplane simply fell off the sky. 25 days after the crash, of flight 611, two Black Box were found, in which, one contains the voice recording of voice conversation in the cockpit and the other, data from the flight computer. However, either could give what happened. After trying to retrieve the conversation in the cockpit, there are no unusual sounds before the crash, only after which, the sound of the plane crashing apart was recorded and the recording stopped. Wreckage examinations were the only option left for investigations. At a cruising altitude of 34,900 feet, the aircraft experienced an in-flight break-up. After which, it approaches to its cruising altitude of 35,000 feet. Before the breakup, the thrust of one of the aircrafts four engine began to subside. Concurrently, the engine was the only one recovered from the sea floor. It was likely due to the structural failure in the aft lower lobe section of the fuselage. The final investigation report indicates that the accident was caused by improper repair and maintenance after a previous incident, happened in 1980. It is the result of metal fatigue of the aircrafts tail. On the 7 February, 1980, China Airlines Flight 611 had a tailstrike accident while landing in Hong Kong. Part of the planes tail was damaged in the incident. A temporary repair on the airplane was done the day after.  A more permanent repair was conducted by a team from China Airlines from 23 May to 26 May, 1980. However, during the permanent repair of the tailstrike, it was not carried in accordance with the Boeing Structural Manual (SRM). The area of the damaged skin on the planes tail was not trimmed or removed properly. In addition, the repair doubler plate that was supposed to cover in excess of 30% of the damaged area did not extend beyond the entire damaged area enough to restore the overall structural strength. The cause of the metal fatigue had evidences of brown nicotine stain, caused by the smoke from the cigarettes of people, about seven years before the disaster (smoking was allowed in a pressurized plane at that time). The engineers detected brown nicotine stain all the way around the doubler plate during the inspection. It is concluded that due to the nicotine to had been seeping out because of the pressure that built up when the airplane is in cruising altitude, then stained the part around the doubler plate of the tail. However, there is no proper maintenance done to the doubler plate, which then causes the plane to fall apart in mid air. Section 3 Maintenance Error The accident for the crash is due to improper structural repair. Day after the tail strike, China Airline did a temporary repair, engineers attached a large aluminum plate over the damaged area but a more permanent repair was to be carried out within four months. Engineers of China Airline placed doubler plates right over the scratched material, but the doubler plate that they used was not 30% larger than the affected area. In fact, it was barely or maybe not even larger than the scratched area in certain area. According to the Boeing Repair Manual, many of the scratches on plane were too deep to be repaired. The entire damaged section should had been cut out and replaced by a new one. However, it was not done so, as evidence indicates that the repair was not done according to the Boeing repair Manual. After much investigations, it appears that the maintenance technician failed to replace the damaged pieces, which causes the scratches to remained. China Airline engineers told the investigator that the scratched area was too large to be cut down, so they sanded the scratches down instead. Even though the repair was not done accordingly to the Boeing Repair Manual instructions, they made it seemed like it was. China Airline Engineers documented that they had repaired according to the Boeing standard, and that made the damage impossible to detect as anyone reading the entry would assumed that the damaged area had been cut out as it should had been done so. Thus, metal fatigue of the instrument caused a maintenance error of improper structural repair by the China Airline engineers was disastrous. Section 4 Contributing Factors 4.1 The China Airlines Flight 611 accident was caused by improper use of information/ incorrect modified information/ improper work process. The China Airlines Flight 611 suffered a tail strike while landing on runway on the 7th of February 1980, 22 years before the accident, at the time when the airplane was only six months old. On the day after the tail strike China Airlines did a temporary repair by attaching a large aluminium plate over the damaged area. A permanent repair was scheduled for the aircraft four months later. According to Boeings Structural Repair Manual, a light scratch on the structure of the aircraft can simply be sanded down. But the tail strike that occurred left a deep scratch on the skin of the fuselage that cannot be repaired by sanding it down. The correct procedure was to cut out the damaged area and replace it with a doubler patch that is 30% larger than the original affected area. China Airlines told that the area was too large to be cut out. They did not follow the procedure and carried on sanding down the scratches and finally covering it with a doubler plate. Unfortunately the repair wasnt sufficient nor was the doubler plate large enough. This shows that the engineer tasked with this did not use the information given to him by the Boeings structural repair manual nor did he followed the work process/ procedure but instead modified the manufacturers Structural repair manual incorrectly. With the doubler plate perfectly concealing the improper repair from ever being detected by anyone, the scratches were left to deteriorate into cracks and allowed to spread out for 22 years, until the pressure in the plane was too large for the structure of the plane to withstand that the plane tore apart in mid-air. 4.2 Another contributing factor includes the complacency of engineers. According to Boeings recommendations, the scratches on the skin of the fuselage were too deep to be repaired. The proper action was to cut out the damaged area and replace it with a doubler patch 30% larger than the removed area. The engineer in charge of the task was probably complacent and thought that it was okay to simply sand the scratched area and put a doubler plate on it. He probably thought that the scratch was nothing serious and the doubler plate was strong enough to support the skin and hence did the repairs following his own false judgments. After the Aloha Airlines Flight 243 accident on April 28 1988, the Federal Aviation Administration laid out inspection procedures to be done on older planes. The inspection of China Airlines Flight 611 was carried out on 2001, a year before the accident. This would have been an opportunity for China Airlines to detect the improper repair that was done 21 years back when they found a brown stain on one of the 31 doublers found on the aircraft. This could have warned them of the catastrophic crack that lies behind the doubler and forced them to take immediate action. The China Airlines overlooked this to be something minor and moved on to the second part of the Federal Aviation Administrations procedure which was a detailed inspection of the repaired areas scheduled to be done on the 2nd November 2002. Unfortunately the Boeing-747 never made it to the specified date. 4.3 Another contributing factor includes improper work process and procedure. The repair done was on the damage caused by the tail strike four months later was not logged in truthfully. The way that the engineer logged the repair done to the damaged area made it seem like it was in accordance to the Boeings recommendations and structural repair manual. This lead the improper repair to be oblivious to anyone as anyone who read the entry would have thought that the damaged area had been cut out as it should have been. 4.4 Amount of supervision The repair job might have lacked supervision when it was done and logged. There was no one to witness and re-check the repair that was supposed to be done, how it was done and how it was logged in the entry. If there was someone watching over their actions then hiding such a big mistake would have been impossible. At the very least the engineer would have had to schedule for another proper repair to be done on the next scheduled check. Section 5 Error Prevention Strategies Aviation agencies around the world to inspect their plane more thoroughly for any hidden damages that might develop into a major structure failure. Operators should take the doubler plates off and do a visual inspection to the structure underneath. Develop a tool that allows mechanics to easily detect hidden damages behind the doubler. Such tools are used today. Using ultrasound, sound wave travels through metals and it can reveal damage underneath the doubler. It is the same technology that allows doctor to see the foetus inside the mothers womb .The disadvantage is that it requires a lot of time. Reinforce importance to perform structural repairs according to the Structure Repair Manual or other regulatory agency approved methods, without deviation, and perform damage assessment in accordance with the approved regulations, procedures, and best practices. For any structural damages beyond existing approved data, operators should seek assistance and consultation from the manufacturer(s) for appropriate repair procedures. Categorize structural repair as a major repair Describe defect type and location clearly Step by step instructions and signature requirements Detailed drawings of the damages, locations on the aircraft, doubler dimensions, material specifications, applicable Structure Repair Manual sections, and any special instructions Review the record keeping system to ensure that all maintenance activities have been properly recorded. No longer accept any quick writes of the repair work was done properly if the repair does not have all the necessary documentation that show the repair was done properly in order to provide a clear view for inspector/auditors conducting records reviews. Assess and implement safety related airworthiness requirements, which consists of the Repair Assessment Program(RAP) and Corrosion Prevention and Control Program, at the earliest practicable time and ensure they are completed in conformity with the approved maintenance documents. When implementing the programs, information such as, operational factors, safety aspects, and the uncertainty factors in workmanship and inspection should be fully documented. Increase maintenance crews awareness with regard to the irregular shape of the aircraft structure, as well as any potential signs that may indicate hidden structural damage. 7. Operators to maintain healthy relationship with the manufacturers field service representative so as to actively seek assistance and consultation from manufacturers field service representatives in maintenance and repair operations. 8. Consider the implementation of stand-alone power sources for flight recorders and adding of cabin pressure as one of the mandatory Flight Data Recorder parameter to improve effectiveness in investigations.

Venus Essay -- essays research papers

Venus, the second planet from the Sun, is the hottest world in the solar system. It is blanketed by a thick atmosphere that heats its surface like the inside of a greenhouse. But with a surface temperature of almost 900 degrees Fahrenheit (480 C), this place is no garden! Other than its atmosphere, Venus is so similar to Earth that it is sometimes called Earth's sister planet. Its diameter and mass are almost identical to Earth's. Why, then, is it so hot? The "greenhouse effect" on Venus is caused by its atmosphere. Energy from the Sun passes through the atmosphere to the planet's surface, where it is absorbed and reradiated at longer wavelengths (as heat). Venus' atmosphere traps these longer wavelengths so they cannot escape into space. The trapped heat builds up, so the planet grows hotter and hotter. The same thing happens in an automobile on a hot day. Sunlight comes through the windows and warms the inside of the car, but the heat is trapped. Even though Venus' orbit brings it closer to Earth than any other planet, its blanket of clouds kept much of Venus a mystery. But space probes sent by the Soviet Union and the United States, as well as studies with ground-based radar, have allowed astronomers to "see" the surface of Venus for the first time. The first exploration of Venus by radar was in 1962. It revealed that Venus spins backward on its axis. If you could stand on the surface of Venus, and if you could see the Sun through the cloud cover, i...

“That’s Life” An Analysis of Holden Caulfield Essay --

The Catcher in the Rye by J.D.Salinger supersedes the norm by staying painfully in the deepest part of the average, for it contains topics that people can relate to (such as, cynicism, nostalgia, and bitterness of life). One of the grand topics the novel discusses is an individuals identity, and how Holden Caulfields identity is shaped through the adversity he faces. Quentin Crisp once said â€Å"The young always have the same problem -- how to rebel and conform at the same time. They have now solved this by defying their parents and copying one another.† Holdens desire to be an individual (a rebel without a cause), hatred of phoniness, and guilt over Allies death creates a substantial conflict. Conformity can be defined in many ways, depending on the person and their situation. In Holdens case conformity is the choice to grow up and move on from childish antics. Holden, however, chooses to be wedged between a world of a child's innocence and the complex world of adulthood. He deities his two younger siblings, Allie and Phoebe, as if the were contenders for sainthood because of ...